Rifle Scopes, Optical Weapon Sights Red Dot Sights, Holographic Sights

Main Page | Products | Photo Gallery | Distributors/Links | User Resources | Checkout


Optics, Rings and Related Hardware


Order your optics and hardware by calling UltiMAK: 208-883-4734
Hours: 10:00 AM to 6:00 PM Pacific time (1:00 PM to 9:00 PM Eastern).

Or use our convenient online ordering.
If you have problems ordering on-line: Please give us a call.




Aimpoint Sights and Mounting Hardware
Click on images for more information.
Aimpoint CompM4 (M68CCO)
Latest Heavy Duty Reflex Sight From Aimpoint.
80,000 hour battery life.
2 MOA red dot.
Night Vision Compatible
More information
$774.00 click for more info

Aimpoint Micro Sight, T-1
Ultra-compact, light, rugged.
50,000 hour battery life.
4 MOA red dot.
Night Vision Compatible
More information
$645.00 click for more info

Aimpoint Micro Sight, H-1
Ultra-compact, light, rugged.
50,000 hour battery life.
4 MOA red dot.
Award winning design.
More information
$576.00 click for more info

Aimpoint 3x Magnifier
Advanced optic, mounts behind reflex and holosights.
Internal fine adjustments for reticle centering.
Transition from 1x to 3x without disturbing your zero.
Heavy-duty, armored construction.
(Part #AP11324)
More information
$552.00 click for more info

Aimpoint 30 mm TwistMount Ring for 3x Magnifier
Push lever and rotate to instantly remove or install magnifier.
Base of unit remains on the receiver rail.
Upper portion of ring stays with magnifying optic.
Precision, anodized aluminum and steel construction.
(Part #AP12234)
More information
$176.00 click for more info

Aimpoint 9000SC Reflex Sight
Longer in back than the CompC
Mounts with 2 rings (included).
Comes with battery, lens caps, and instructions.
Reticle; 4 M.O.A. red dot
(Part #AP11407)
Out of Stock
More information
$398.00 click for more info

30mm Aluminum Rings, Low, Pair of Two
Compatible with all Weaver and Picatinny rails.
These rings have a round cross bolt.
(Part #AP12229)
More information
$22.00 click for more info

Aimpoint CompC3 reflex sight
Comes with battery, lens caps, and Weaver style X-wide ring.
ACET system. 50,000 hour battery life.
Reticle; 2 MOA red dot
(Part #AP11421)
More information
$428.00 click for more info

Aimpoint CompML2 military spec reflex sight
Comes with battery and flip up lens caps.
Ring sold separately.
(Part #AP10338)
More information
$455.00 click for more info

Aimpoint CompML3 military spec reflex sight
New ACET system: 50,000 hr battery life!
Comes with battery, flip up lens caps.
and protective rubber cover.
Ring sold separately.
New 2 M.O.A. Dot Reticle.
(Part #AP11416)
More information
$516.00 click for more info

Aimpoint CompML3 military spec reflex sight
New ACET system: 50,000 hr battery life!
Comes with battery, flip up lens caps.
and protective rubber cover.
Ring sold separately.
4 M.O.A. Dot Reticle.
(Part #AP11405)
More information
$516.00 click for more info

Aimpoint CompM2 military contract reflex sight (M68)
Night vision compatible
Comes with battery and flip up lens caps.
Ring sold separately.
(Part #AP10336)
More information
$507.00 click for more info

Aimpoint CompM3 maximum duty reflex sight
Night vision compatible
Comes with protective cover, battery and flip up lens caps.
Ring sold separately.
New 2 M.O.A. Dot Reticle.
(Part #AP11408)
More information
$574.00 click for more info

Aimpoint CompM3 maximum duty reflex sight
Night vision compatible
Comes with protective cover, battery and flip up lens caps.
Ring sold separately.
4 M.O.A. Dot Reticle.
(Part #AP11403)
More information
$574.00 click for more info

Flip-up Lens Cover For Aimpoint 1x - Front
Fits Aimpoint 1x sights (except Micro).
Best protection, most convenient.
(Part #AP12223)
More information
$18.00 click for more info

Flip-up Lens Cover For Aimpoint - Rear
Fits all Aimpoint sights (except Micro).
Best protection, most convenient.
(Part #AP12224)
More information
$18.00 click for more info

Extended Battery Cap for Aimpoint Comp Sights
Keeps a spare power cell in reserve.
For CompM2, CompML2, CompM3, CompML3.
Comes with extended tether strap.
(Part #AP12247)
More information
$35.00 click for more info

KillFlash Anti Reflection Device (ARD)
Fits all Aimpoint 1x CET and ACET sights
Does not interfere with standard or flip-up lens covers
(Part #AP12239)
More information
$35.00 click for more info

30mm X-wide Picatinny Ring for all Comp series sights, SRP-L
(Part #AP12243)
For Picatinny rails (1913 Mil Standard)
This ring has a wide rectangular cross bolt.
Low. Optical center over top of rail: 21.5 mm +/- 0.1 mm
More information
$77.00 click for more info

30mm X-wide Weaver Ring for all Comp series sights, SRW-L
(Part #AP12244)
For Picatinny or Weaver rails with rectangular slots.
This ring has a narrow rectangular cross bolt.
Low. Optical center over top of rail 21.5 mm +/- 0.1 mm
More information
$77.00 click for more info

A.R.M.S. #22M68 30mm X-wide Throw Lever Ring
for all Comp series sights

(Part Number: ARMS#22/M68)
Detaches with the flip of a lever.
Slightly higher than the Aimpoint rings listed above.
Precision engineered for Picatinny rails.
More information
$109.00 click for more info

Spacer for A.R.M.S. #22M68
Elevates Throw Lever Ring for M-4 flat top

For AR-15, AR-10, M-16, M-4 flat top receivers.
(Part Number: ARMS#22/SP)
(THROW LEVER RING SOLD SEPERATELY)
More information
$13.00 click for more info


GG&G Cantilever Ring For Aimpoint and Tripower Sights
Places optic at correct height and leaves more room on receiver rail

For AR-15, AR-10, M-16, M-4 flat top receivers.
QD-- uses captivated wing nut and spring-loaded side bar for ease of use.
Perfect for use with 3x magnifier or a night vision monocular.
(Part #GG-1014)
More information
$174.00 click for more info

A.R.M.S. Carry Handle Ring for Aimpoint Comp
30 mm X-Wide Ring
Interfaces directly to AR carry handle

For AR-15, AR-10, M-16.
(Part; ARMS#16A)
More information
$73.00 click for more info

AR15/AR10 Carry Handle Mount A.R.M.S. #2
See-through tunnel design maintains use of iron sights.
(Part #ARMS-2)
Out of Stock
More information
$58.90 click for more info

AR15/AR10 Carry Handle Mount A.R.M.S. #2 Extended
See-through tunnel design maintains use of iron sights.
Extended Length for More Mounting Options. 
(Part #ARMS-2Ext)
More information
$63.90 click for more info

A.R.M.S. #5 Multibase
Protects AR-15/M-16 flat top receiver rail and
serves as a rail riser.
(Part #ARMS-5)
More information
$58.90 click for more info

Aimpoint QRP (Quick Release Picatinny) 30 mm Ring
For all Aimpoint Comp series 1 X sights
(Part #AP12245)
Perfect for use on flat top ARs or with 10174 Forward Carry
Handle Mount (sold separately)
Optical center over top of rail: 30.4 mm +/- 0.1 mm
More information
$101.00 click for more info

Spacer for Aimpoint QRP Ring and TwistMount Ring
Provides correct height for QRP or TwistMount on AR flat tops.
For use directly on flat top AR receiver rails or
forend rails of the same height
(Part #AP12227)
More information
$27.00 click for more info


EOTech Holographic Weapon Sights
Click on images for more information.
EOTech 553 Military Model
(SU-231/PEQ)
Night Vision Compatible
Quick Detach, Dual A.R.M.S. Throw Lever System

Uses CR123 batteries.
Interfaces directly with AR-15 flat top / M4 Picatinny rails.
Raised 7 mm base.
Reticle pattern: 65 MOA ring with 1 MOA dot.
(Model 553.A65BLK)
More information
$619.00 click for more info

L3 EOTech 557 Holographic Weapon Sight
New ballistic reticle specific to .223 caliber munition.
Buttons on left side to work specifically with NV or magnifiers.
AA battery model (supports Lithium or Alkaline)
New QD captivated thumb knob design.
Night Vision Compatible, Gen I-IV
(Model: 557.AR223)
Out of Stock
More information
$529.00 click for more info

EOTech 552 Military / Law Enforcement Model
Night Vision Compatible

Uses AA Batteries
Interfaces directly with Weaver and Picatinny rails.
Reticle pattern with 65 MOA ring and 1 MOA dot.
(Model 552.A65/1 rev F)
Out of Stock
More information
$459.00 click for more info

EOTech 512 "Tactical" Model
AA battery model without NV settings.
Interfaces directly with Weaver and Picatinny rails.
Reticle pattern with 65 MOA ring and 1 MOA dot.
(Model 512.A65 rev F)
Out of Stock
More information
$377.00 click for more info

EOTech 511 N Cell Model
N Cell battery model without NV settings.
Interfaces directly with Weaver and Picatinny rails.
Reticle pattern with 65 MOA ring and 1 MOA dot.
(Model 511.A65 rev F)
Out of Stock.
More information
$356.00 click for more info

New
GG&G Flip up cover for EOTech Sights
Fits 511, 512, 551, & 552.
Mounts inside the optic's protective hood.
No modifications required
Ambidextrous operation.
NOT compatible with EOTech 553, and 557.
(Model; GG-1275)
More information
$39.50 click for more info

GG&G "ACCUCAM" Quick Detach Lever for EOTech Sights
Replaces factory cross bolt.
Maintains original sight height.
All-steel construction.
No modifications required.
Includes screws, wrenches and instructions.
NOT compatible with EOTech model 557.
(Model; GG-1190)
More information
$82.00 click for more info



Main Page | Products | Photo Gallery | Distributors/Links | User Resources | Checkout

UltiMAK: Scope Mounts, Sights, Accessories Reflex Sights, Holosights, Scopes


Send us mail | fax: 208-882-3896 voice: 208-883-4734
2216 South Main, Suite B2, Moscow, ID 83843
The UltiMAK Over-Barrel Gas Tube Optic Mount is patented.