EOTech Holographic Weapon Sight (HWS)
Military / Law Enforcement Model
Night Vision Compatible
Uses AA batteries (Lithium, Alkaline or Rechargeable)
Interfaces directly with Weaver dovetail and Picatinny (MIL STD 1913) mounting rails.
Optical Magnification; 1X
Reticle; Laser transmission hologram consisting of a 1 M.O.A. red dot inside a 65 M.O.A. ring.
Model; 552.A65/1 (rev. F)
Out of Stock
Back to Optics, Rings, & Hardware
The open holographic reticle pattern is designed to be instantly visible in any lighting conditions. Instinctive to center regardless of the shooting angle, it stays in view when sweeping an engagement zone or when engaging moving targets. The standard 65 minute of angle ring has four alignment ticks and a 1 M.O.A. aiming dot.
The HWS delivers an impressive ten million to one (10,000,000:1) bright to low reticle contrast ratio, ensuring that the reticle is always visible. The reticle can be easily seen against targets in full sunlight - even in desert or tundra environments, and in moonlight. Its night vision compatible settings work in tandem with all current night vision devices. A separate NV button toggles the reticle brightness between the NV setting and the selected daylight setting.
Includes both an Allen head cross bolt with wrench and a tool-less thumb knob bolt with coin
slot, plus 2 AA alkaline cells.
Shown here on an AK (cal. 5.56 x 45 mm) with the UltiMAK M1-B optic mount. This sight is ideal on a flat top AR-15 / M-16 / M-4, and it works well on the Mini-14, Mini-30 and M1 .30 Carbine when used with UltiMAK mounts. EOTech sights will co witness iron sights on M-16 type rifles, but will not co witness on AKs, Mini-14/30s, or .30 Carbines.