Four Position Collapsable Buttstock for AR-15/CAR-15/M-4 Includes aluminum tube, spring and buffer Color: Black (Model# 4PCAR) More information ,	$39.95
Six Position Collapsable Buttstock for AR-15/M-16/M-4 Includes aluminum tube, spring and buffer Color: Black (Model# 6PCAR) More information ,	$60.00
ACE SOCOM Collapsable Buttstock for AR-15/CAR-15/M-4 Five position push button adjustment. Heavy duty all-metal construction. Includes extra-strength aluminum tube. CAR-length Spring and buffer NOT included. Color: Black (Model# M4SOCOM) Out of stock More information ,	$179.00
AR-15, M-16, CAR-15, AR-10 Stock Wrench Fits threaded buttstock locking collar. For removing and installing buttstock. Stamped steel. Finish; Black Paint Model; ARSW More information ,	$5.00
Precision Folding Rear Sight for Flat Top Receivers .50 MOA windage click adjustment. Low Profile - Only 0.610" when folded. Steel and aluminum construction. Model; ARMS 40L-P More information ,	$129.00
AR-15, M-16, CAR-15, AR-10 Front Sight Tool Four points at one end, five points on the other. For calibrating your front sight elevation. Steel construction with knurled center portion. Finish; Black Oxide Model; ARST More information ,	$5.00

New! Aimpoint CompM4 (M68CCO) Latest Heavy Duty Reflex Sight From Aimpoint. 80,000 hour battery life. 2 MOA red dot. Night Vision Compatible More information	$702.00
New! L3 EOTech 557 Holographic Weapon Sight New ballistic reticle specific to .223 caliber munition. Buttons on left side to work specifically with NV or magnifiers. AA battery model (supports Lithium or Alkaline) New QD captivated thumb knob design. Night Vision Compatible, Gen I-IV Model: 557.AR223 More information	$619.00
Trijicon A.C.O.G. 4 x 32 Scope TA01 Fits directly into AR-15/M-16 carry handle. More information	$841.50
TA51 Flat Top Mount for Trijicon ACOG Scopes. Fits AR-15, M-16, M-4 flat top (Picatinny / 1913) receiver rails. Aluminum construction with steel thumb knobs. TA51 More information	$61.20
A.R.M.S. Throwlever Flat Top Mount for Trijicon ACOG Scopes. Fits AR-10, AR-15, et al flat top (Picatinny / 1913) receiver rails. Aluminum construction with steel levers and buffers. Proven, Reliable A.R.M.S. System TA12 More information	$148.75
M16 / AR15 Flat top mount for Trijicon Reflex RX14 More information	$105.40
M16 / AR15 Carry Handle Mount for Trijicon ReflexRX10 More information	$126.65
Tenebraex killFLASH Anti-Reflection Device for Trijicon Reflex II RX22 More information	$29.75
More Premium Optics, Rings and Related Hardware: Aimpoint, EOTech and Trijicon Click here for Complete Optic Sights Product Line ,
New Item! Aimpoint 3x Magnifier Advanced optic, mounts behind reflex and holosights. Internal fine adjustments for reticle centering. Transition from 1x to 3x without disturbing your zero. Heavy-duty, armored construction. (Part #AP11324) More information	$500.00
New Item! Aimpoint 30 mm TwistMount Ring for 3x Magnifier Push lever and rotate to instantly remove or install magnifier. Base of unit remains on the receiver rail. Upper portion of ring stays with magnifying optic. Anodized aluminum and steel construction. (Part #AP12234) More information	$160.00
Extended Battery Cap for Aimpoint Comp Sights Keeps a spare power cell in reserve. Fits CompM2, CompML2, CompM3, CompML3. Comes with extended tether strap. (Part #AP12247) More information	$33.00
KillFlash Anti Reflection Device (ARD) Fits all Aimpoint 1x CET and ACET sights Does not interfere with standard or flip-up lens covers (Part #AP12239) More information	$34.00
A.R.M.S. #22M68 30mm X-wide Throw Lever Ring for all Comp series sights (Part Number: ARMS#22/M68) Detaches with the flip of a lever. Slightly higher than the Aimpoint rings listed above. Precision engineered for Picatinny rails. More information	$109.00
Spacer for A.R.M.S. #22M68 Elevates Throw Lever Ring for M-4 flat top For AR-15, AR-10, M-16, M-4 flat top receivers. (Part #ARMS#22/SP) (THROW LEVER RING SOLD SEPERATELY) More information	$13.00
New Item! GG&G Cantilever Ring For Aimpoint and Tripower Sights Places optic at correct height and leaves more room on receiver rail For AR-15, AR-10, M-16, M-4 flat top receivers. QD-- uses captivated wing nut and spring-loaded side bar for ease of use. Perfect for use with 3x magnifier or a night vision monocular. (Part #GG-1014) More information	$174.00
A.R.M.S. Carry Handle Ring for Aimpoint Comp 30 mm X-Wide Ring Interfaces directly to AR carry handle For AR-15, AR-10, M-16. (Part; ARMS#16A) More information	$73.00
AR15/AR10 Carry Handle Mount A.R.M.S. #2 See-through tunnel design maintains use of iron sights. (Part #ARMS-2) More information	$58.90
AR15/AR10 Carry Handle Mount A.R.M.S. #2 Extended See-through tunnel design maintains use of iron sights. Extended Length for More Mounting Options.  (Part #ARMS-2Ext) More information	$63.90
A.R.M.S. #5 Multibase Protects AR-15/M-16 flat top receiver rail and serves as a rail riser. (Part #ARMS-5) More information	$58.90
M-16/AR-15/AR-10 Forward Carry Handle Mount For use with QRP (sold separately) Maintains full use of iron sights (Part #AP10174) More information	$60.00
Aimpoint QRP (Quick Release Picatinny) 30 mm Ring For all Aimpoint Comp series 1 X sights (Part #AP12245) For use on flat top ARs or with 10174 Forward Carry Handle Mount (sold separately) More information	$97.00
Spacer (for Aimpoint QRP Ring) Elevates sight height of QRP (Part #AP12227) For use directly on flat top AR receiver rails or forend rails of the same height More information	$11.00

GG&G "ACCUCAM" Quick Detach Lever for EOTech Sights Replaces factory cross bolt. All-steel construction. No modifications required. Includes screws, wrenches and instructions. NOT compatible with EOTech model 557. (Model; GG-1190) More information

$82.00

Main Page | Products | Photo Gallery | Distributors/Links | User Resources | Checkout