Collapsible Buttstock for Milled Receiver AKs
Heavy duty composite construction.
Fits milled receivers having four-sided sockets and single tang
(or remove lower tang).
Does not fit receivers with circular sockets.
Drill bit and screws included.
Made In U.S.A.
Back to AK Products
A collapsible stock allows the rifle to fit in a smaller space for transport, but more important, it allows for adjustable length of pull. Wearing only a t-shirt, compared to a wearing a heavy coat or web gear, means your length of pull, when using a fixed stock, changes radically with the circumstances. The six position stock solves this problem with positive locking adjustments, giving you the ability to maintain a comfortable and consistent feel in all circumstances.
Designed specifically for the AK, it sits at the correct height and angle for proper spotweld. Another, unsung benefit to a collapsible stock is that it does not discriminate against small people. It installs easily to your milled receiver, replacing the standard fixed butt. Mounting screws, a matching drill bit and instructions are included. It has a sling loop on the bottom, and a slot for a right or left hand, side-mounted sling at the back. Largely impervious to moisture and common solvents, it is designed for many years of reliable service. Length of pull; 11.625" to 15.5" (trigger to buttplate) in six increments. 8.25" to 12.1" from back of receiver. Shown here on an Arsenal AK with UltiMAK M1-B mount and Leupold M8 4X pistol scope (yes you can use a telescope on the UltiMAK mount).